Temperature Mode - Frico PFSE4 Original Instructions Manual

Fan mode
The fan speed can be set to suit any
requirements. Modes: Auto/Low/High/Off.
User menu
Select
P
A
OK Confirm
Set the desired fan mode.
A
Auto
Low
OK Confirm

Temperature mode

It is possible to choose between three modes -
comfort, reduced mode (night mode) or frost
protection. Settings for Comfort mode and
Reduced mode are also applied in the week
program when used.
User menu
Select mode in the user menu:
Comfort mode
Reduced (night mode)
Frost protection
OK
Confirm
Set the desired room temperature.
OK
Confirm
OFF
OFF
High
PFS
Fan mode Functions
Auto The fan runs at low speed except:
- when the room temperature is
more than 2 °C below the set point,
then the fan speed increases to
high speed for a shorter heating
time.
- if it is too hot in the the unit
OFF The fan is off.
When Off is selected, the fan first
runs during a cooling period until
the right temperature is reached be-
fore it stops. To prevent excessive
internal temperature, the internal
sensor may reduce the power.
Low Low speed.
To prevent excessive internal tem-
perature, the internal sensor may
reduce the power.
High High speed
Default settings
Temperature mode
Comfort mode
Reduced (night mode)
Frost protection
See section Fan modes to set the desired
fan mode. For temperature mode Frost
protection, the fan mode is locked to High (for
maximum heat distribution).
GB
Set point Fan mode
21 °C
18 °C
10 °C High (locked)
23