Table of Contents
Advertisement
6866588D06–RB
Chapter 2: Getting Started
NOTICE:
•
Your service provider can configure the radio to turn on automatically after you insert
the battery.
•
Your radio always powers up, if you remove the battery for a period shorter than 3–5
seconds.
2.2.4
Removing the Battery
IMPORTANT: The following procedure must be performed only in non-hazardous environment.
Prerequisites: Turn off the radio.
Procedure:
1 Move the latch in the direction indicated by the arrow and hold it.
2 Slide the battery toward the bottom of the radio.
2.2.5
Charging the Battery
You can charge a battery separately or attached to a radio.
IMPORTANT: Use only Motorola approved chargers which provide optimal performance. Using
other chargers invalidates the warranty and may fail to fully charge, reducing the life of the
battery.
Prerequisites:
Do not charge the battery in a hazardous area.
Procedure:
1 Connect the charger to an appropriate power source (100–240 V, 12 V), according to the
specification of the charger.
2 Perform one of the following actions:
•
Desktop chargers – insert the battery or the radio with the battery attached into the
appropriate socket of the charger. Ensure that the battery/radio made good connection with
the charger and that the LED on the charger is indicating that charging is in progress.
•
Travel chargers and car chargers – connect the charger to the radio with the battery
attached. Ensure that the charger is firmly connected to the radio and that the radio display is
indicating that charging is in progress.
Postrequisites: The battery may heat up during charging. After charging, make sure that the battery
and the radio are within the operating temperature range before using the radio.
22
Send Feedback
Advertisement
Table of Contents
