DèLonghi ECAM 650.85 Instruction Manual page 25

TURN DIAL TO <CLEAN> POSI-
TION TO START CLEANING
CLEAN
TURN THE MILK FROTH
ADJUSTMENT DIAL TO MILK
POSITION
DESCALING NEEDED
PRESS OK TO START
(~40MIN)
REPLACE WATER SOFTENER
FILTER
PRESS OK TO START
GENERAL ALARM: REFER
TO USER MANUAL / SMART
COFFEE APP
Milk has been delivered recently and the tubes
inside the milk container must be cleaned (D).
The milk container has been inserted with
the froth adjustment dial (D1) in the "CLEAN"
position.
The machine must be descaled.
The water softener filter (C4) is exhausted.
The inside of the appliance is very dirty.
The appliance needs descaling and/or the filter
(C4) must be replaced.
The tubes inside the milk container (C) must be
cleaned.
The filter (C4) must be replaced.
Turn the froth adjustment dial (D1) to CLEAN
(fig. 21).
Turn the dial to the required froth position.
Press "
cedure described in section "19. Descale" needs
to be performed.
Press "
or "
Follow the instructions in section "21. Water
softener filter".
Clean the inside of the appliance thoroughly,
as described in section "18. Cleaning". If the
message is still displayed after cleaning, con-
tact customer services.
The descaling procedure described in section
"19. Descale" needs to be performed and/or
the filter needs replacing or removing as de-
scribed in section "21. Water softener filter".
Turn the froth adjustment dial (D1) to CLEAN
(fig. 21).
Replace the filter or remove it as described in
section "21. Water softener filter".
30
" to start descaling or ""
" to descale later. The descaling pro-
" to replace or remove the filter,
" to carry out the procedure later.