DèLonghi ECAM 650.85 Instruction Manual page 14

AROMA
36
2. "SELECT CUP SIZE AND FROTH QUANTITY (STEP 2 OF 7)"
(fig. 37): select the quantity in the cup ("small" or "large")
and one of the froth levels (
extra): then press "
3. "ADD AERO STIRRER IN CARAFE (STEP 3 OF 7)" (fig. 38): lift
the carafe lid (E1) (fig. 38), pull the release slide (E6) and
extract the carafe funnel (E2) (fig. 38), then make sure the
aero stirrer (E7) is inserted and attach the assembled fun-
nel to the carafe (fig. 39);
4. Press " " to move on to the next step;
38
5. "ADD 9 (or 18) ICE CUBES AND SUGAR (STEP 4 OF 7)" (fig.
40): add the ice cubes prepared with the mould (C9) provid-
ed and the right amount of sugar for the "small" or "large"
quantity, then press "
37
min, med,
";
39
";
6. "INSERT CARAFE UNDER COFFEE SPOUT (STEP 5 OF 7)" (fig.
41): lift the coffee spouts (A8) and position the carafe so
that the coffee is delivered directly into the carafe (E): press
" " to start the function;
7. Coffee is delivered into the carafe (fig. 42). "ESPRESSO DE-
LIVERY, X-STRONG AROMA" appears on the display with a
bar which gradually fills as preparation proceeds. Delivery
stops automatically;
8. "CLOSE LID AND INSERT CARAFE, PRESS OK TO START" (fig.
43). Extract the carafe (E), close the lid (E1) and attach the
carafe to the connection nozzle, pushing as far as it will go
(A9). Press "
starts mixing the coffee and ice and "COLD COFFEE" appears
on the display (B) with a bar which gradually fills as prepa-
ration proceeds.
Preparation stops automatically.
Please note!
To interrupt mixing manually at any moment, press "
" and confirm with "YES". "WANT TO CONTINUE
MIXING?" appears on the display: press "YES" until you obtain a
satisfactory froth and/or until all the ice has melted, then press
" ". You can mix twice for a maximum of about a
minute.
19
40
42
" to start the function. The appliance
41
43