DèLonghi ECAM 650.85 Instruction Manual page 24

INSERT WATER SPOUT
INSERT MILK CONTAINER
INSERT INFUSER ASSEMBLY
PUSH
WATER CIRCUIT EMPTY
PRESS OK TO START FILLING
PROCESS
PRESS OK TO START CLEANING
PROCESS OR TURN MILK
FROTH ADJUSTMENT DIAL
The hot water spout (C6) is not inserted or is
inserted incorrectly
The milk container (D) is not inserted correctly. Insert the milk container as far as it will go (fig.
The infuser (A19) has not been replaced after
cleaning.
The water circuit is empty
The milk container has been inserted with
the froth adjustment dial (D1) in the "CLEAN"
position.
Insert the water spout as far as it will go.
19).
Insert the infuser as described in section "18.3
Cleaning the infuser".
Press "
spout (C6) until it flows out normally. Delivery
stops automatically.
If the problem persists, make sure the water
tank (A16) is fully inserted.
To proceed with the CLEAN function, press "
one of the milk positions.
29
" to deliver water from the
" or turn the froth adjustment dial to