Advertisement
Quick Links
Rhein Tech Laboratories, Inc.
Client: Alarm.com
360 Herndon Parkway
Model: ADC-IS-220-LP
Suite 1400
Standards: FCC 15.249/IC RSS-210
Herndon, VA 20170
IDs: YL6-143IS22/9111A-143IS22
http://www.rheintech.com
Report #: 2014202
Appendix K:
Manual
Please refer to the following pages.
Page 27 of 34
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Alarm.Com ADC-IS-220-LP
Summary of Contents for Alarm.Com ADC-IS-220-LP
- Page 1 Rhein Tech Laboratories, Inc. Client: Alarm.com 360 Herndon Parkway Model: ADC-IS-220-LP Suite 1400 Standards: FCC 15.249/IC RSS-210 Herndon, VA 20170 IDs: YL6-143IS22/9111A-143IS22 http://www.rheintech.com Report #: 2014202 Appendix K: Manual Please refer to the following pages. Page 27 of 34...
-
Page 2: Installation Guide
Up to three Image Sensors PIR Lens and Camera Coverage Diagrams may be added per system. (Note: The Alarm.com GSM Module V4 is required to use both Image Sensor and emPower™.) 8 ft. - Page 3 By default, the image sensor LED does not illuminate when activated by motion unless the sensor is in test mode. The LED can be enabled via the Alarm.com Dealer Website for each Image Sensor on a customer’s account. When enabled, the LED illuminates for 3 seconds upon motion activations (at most every 3 minutes while disarmed).
- Page 4 Alarm.com Image Sensor Installation Guide REGULATORY INFORMATION Changes or modifications not expressly approved by Alarm.com can void the user’s authority to operate the equipment. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Need help?
Do you have a question about the ADC-IS-220-LP and is the answer not in the manual?
Questions and answers