Table of Contents
Advertisement
Care and maintenance
Round Burner head / caps
3. Match the burner caps to the burners
by size, and then re-install the caps on
the burner heads.
CAUTION
Each cap fits on a specific burner head.
Verify that each cap is installed and lies
flat on the correct head.
1. Put the burner heads on the bases as
shown at left. The bottom of the burner
head fits inside the top of the base.
2. Turn the head until it drops into place.
Wiggle each head to verify it is seated
properly.
3. Place the burner caps (brass or
porcelain) atop the burner rings. The
ridge around the bottom of each cap
fits around the top of the ring.
CAUTION
Verify that all burner parts properly
seated. If any are askew, disassemble
reassemble them properly.
35
English
Advertisement
Table of Contents
