Table of Contents
Advertisement
Installation safety
WARNING
To reduce risk of fire, electric shock, personal injury, or death:
• The cooktop should be installed and properly grounded by a qualified installer, per the
Installation Instructions.
• Do not service/modify/replace the cooktop or any part of it unless specifically
directed in this manual. All other service should be done by a qualified technician.
• Use only new, flexible connectors when installing the cooktop.
• Make sure the cooktop's hold-down brackets are properly installed. (See the
Installation Instructions for details.)
• Remove all tape and packaging materials.
• After unpacking the cooktop, remove all accessories from inside and around it.
(Cautiously handle the heavy grates and griddles.)
• Ensure no parts came loose during shipping.
• Ensure the cooktop is installed/adjusted according to local regulations by a qualified
service technician or installer for the type of gas (natural or LP) you will use. For the
cooktop to use LP gas, the installer must replace the 5 surface burner orifices with the
provided LP orifice set, and reverse the GPR adapter. The agency performing this work
shall be responsible for the gas conversion.
• Installation of this cooktop must conform to local codes or, in their absence , with the
National Fuel Gas Code, ANSI Z223.1/NFPA.54, latest edition. In Canada, installation
must conform to the current Natural Gas and Propane Installation Code, CAN/CGA-
B149.1, or the current Propane Installation Code, CAN/CGA-B149.2, and with local codes
as applicable. This cooktop has been design-certified by ETL according to ANSI Z21.1,
latest edition, and Canadian Gas Association according to CAN/CGA-1.1, latest edition.
• Ensure the middle valve has adequate capacity and is unclogged.
12
English
Advertisement
Table of Contents
