Table of Contents
Advertisement
The difference between the Tx power setting and the received "own" RSSI is the Antenna /
system isolation.
Unkey the OCR by setting PTT to OFF.
Set the RSSI CAS Threshold to at least 10 dB higher than the measured "own" RSSI level
(for example if the measured "own" RSSI level was -120dBm, set the RSSI CAS Th ON to -110dBm
or higher).
8A535X03 Rev. Preliminary-00
Page 15 of 17
Advertisement
Table of Contents
Need help?
Do you have a question about the 8A535X03 and is the answer not in the manual?