Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Studiomaster MIXDOWN
Summary of Contents for Studiomaster MIXDOWN
- Page 2 Playing back the Multitrack Recording ••••••••• Overdubbing •••••••••••••••• Tape Remix ••••••••••••••• Stereo Mixdown - The Final Mix ••••••••••• An alternative Mixdown method ••••••••••••• AUX LINE Mixdown •••••••••••••••• 5:10 Live Performances ••••••••••••••••••• 5:11 Preparing the console ••••••••••••• 5:12 The Soundcheck ••••••••••••• 5:13 The Performance ••••••••••••••...
- Page 3 The 16.4.8 has 26 inputs in total at mixdown and the 16.8.16 has 34. DO NOT switch on the console until this section has been read: 1:2 READ THIS BEFORE PROCEEDING: DO NOT CONNECT THE AC SUPPLY LEAD TO...
- Page 4 (no socket and connector) are fixed at 110 to 120V AC input and cannot be changed. internally powered MIXDOWN, the voltage selector is fitted the rear panel. On both external power supplies, it is at the back. voltage...
- Page 5 'to Pins 2 and 3 of XLR MIC input for use with condenser microphones. TAPE button switches the input channel from LINE jack to TAPE jack when depressed, that tape returns left connected thus eliminating need FIG 1 MIXDOWN...
- Page 6 Auxs 1,2,3 & 4 are post-fade (for mainly as effects sends). Aux 5 is pre-EQ and pre-fade. is pre-fade. Aux 5 intended for studio cue/stage foldback purposes. switch is provided to access either Aux FIG 1 Studiomaster...
- Page 7 Aux 5 (as it is pre-EQ) • routing button. When depressed, this routes post-fader, post-pan signal directly to left/right outputs, bypassing the subgroups. signal be used for final multitrack mixdown recording studios or for routing of signals to left/right outputs live performance applications. ROUTING BUTTONS. These...