Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Studiomaster PRO VI 16.6
Summary of Contents for Studiomaster PRO VI 16.6
- Page 1 PRO VI SERIES Models : PRO VI 16.6, PRO VI 24.6...
-
Page 2: Table Of Contents
Contents Note: For both send ways, the signal take-off points can be internally modified separately for each Operating Elements and Connections .... 1 individual channel (to be performed by skilled personnel only). See chapter 4.2. Safety Notes ........... 3 4 For the mono channels: Applications ............ - Page 3 13 Level control for the recording output “RECORD” 27 Stereo inputs (6.3 mm jack, bal.) for stereo channels for connecting stereo units with line output level. 14 Master controls respectively for the send way “AUX” and the send way “MON” Note: In case of a mono unit, only use the upper jack “LINE-LEFT”.
-
Page 4: Safety Notes
N or coloured Black. The unit is supplied with external power supply only use power supplies recommended by studiomaster with 3. The wire which is coloured Brown must be conn- Diamond series. EP7 is supplied with hazardous mains ected to the terminal which is marked with the le- voltage (230V~). -
Page 5: Switching Off The Phantom Power For Individual Channels(Mono Channels) Or Switching It On (Stereo Channels)
2) To remove the front panel For the pre-fader send way ‘MON’, the signal take-off point for each channel can be separately modified to Unscrew the screws at the edges of the front pre-equilizer or post-fader. For this purpose, rearrange panel and the screws arranged around the connec- the jumper ‘JP2’... -
Page 6: Units With Line Output Level
5.1.2 Units with line output level 2) Connect the output of the effect unit to the stereo input ‘AUX-IN’ (in case of a mono effect unit, only Connect stereo units with line output level to the balan- use the upper jack ‘LEFT’) or to the line input of an ced 6.3mm jacks ‘LINE-LEFT’... -
Page 7: Operation
6 Operation not light up at all or light up only shortly. In case the LED lights permanently, the level of the input signal Prior to switching on it is recommended to set the mas- must be reduced [by reducing the input amplification ter faders ‘MAIN MIX’... -
Page 8: Mixing The Audio Sources
Admissible ambient temp.: ..... 0 - 40°C 1) For post-fader monitoring of the master signal, unlock Dimensions ( PRO VI 16.6 ): ... 618x540x100mm all PFL buttons. Weight: ........... 13.8kg 2) For simultaneous pre-fader monitoring of one or sev- eral input channels, press the corresponding PFL bu- Dimensions (PRO VI 24.6): .... -
Page 9: Glossary
8 Glossary Aux send way: Via an AUX send way, the signals of the Post-fader: A signal is taken after the channel fader, i.e. input channels can be routed out of the mixer. For this The level of the signal taken is influenced by the purpose, the signal is mixed to the AUX send way via an preceding fader. - Page 10 The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings contained in this manual. Studiomaster Professional cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations and warnings. This is also applicable to all damages in whatever form.
Need help?
Do you have a question about the PRO VI 16.6 and is the answer not in the manual?
Questions and answers