CUE ACTIVE OUTPUT LEVEL Rear panel WARNING: THIS UNIT MUST BE EARTHED. STUDIOMASTER MODEL - FUSION+ CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. SERIAL...
Unpacking Remove your Studiomaster Fusion from its packing and ensure that along with this operator guide you have an AC power cord/mains lead and a warranty card. Retain the packing carton in the eventuality that the unit needs to be returned for service or repair and please complete and return your warranty card.
CONTROLS & FEATURES WHAT HAPPENS IF I PRESS THIS? CHANNELS 1, 2 & 3 Channels 1- 3 use a combination XLR and 1/4” jack connector. You can use a microphone fitted with a 1/4” jack or, for best results, use a balanced microphone with a 3-pin XLR connector.
The fader adjusts the level from the channel to the main output. For normal operation always operate these faders at the top (0dB) position. This gives the best audio performance and gives maximum fader travel for smooth fade outs. Connectors for stereo channels are all RCA/phono type. www.studiomaster.com www.studiomaster.com...
CONTROLS & FEATURES WHAT HAPPENS IF I PRESS THIS? CROSS-FADER The cross-fader can be used simply to fade from one stereo channel to another or creatively by the DJ. Two ‘TAPER’ controls (34 & 35) in the master section of the Fusion allow a number of effects and mixing tricks.
57. VOCAL 1 : a combination of reverb and delay developed by Studiomaster and the choice of many professional performers world wide. SMALL & LARGE REVERB : good quality reverbs, great for ballads.
CONTROLS & FEATURES WHAT HAPPENS IF I PRESS THIS? REAR PANEL 10-11 8-9 Connectors for stereo channels are all RCA/phono type. LINE LINE LINE B LINE A LINE B LINE A LEFT LEFT LEFT LEFT LEFT LEFT Stereo channels 8-9 & 10-11 are fitted with ‘ground’ terminals for record decks.
Service Information If you have a problem with your Studiomaster product or think it has developed a fault you should first carefully check the Trouble Shooting section in this guide. If this does not solve the problem or if the product is physically damaged, contact your local dealer or distributor for service details.
GLOSSARY TELL ME WHAT IT MEANS Glossary AC POWER SUPPLY DELAY Local electrical supply Nowadays a delay or DDL (Digital Delay Line) is an electronic effects processor which samples a short sound and replays it back ASSIGN a short time later to give an echo effect. To switch or route a signal to a specific signal path.
Page 12
4,5 and 6 pin XLRs also exist for specialist applications. Pre Fade Listen. A function which allows the operator to monitor (usually on headphones and on meters) a signal even when the channel output fader is down at its minimum volume position. www.studiomaster.com www.studiomaster.com...
GET YOU UP AND RUNNING Suggested set-up WARNING: THIS UNIT MUST BE EARTHED. STUDIOMASTER MODEL - FUSION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Page 14
GET YOU UP AND RUNNING Solo performer Suggested set-up WARNING: THIS UNIT MUST BE EARTHED. STUDIOMASTER MODEL - FUSION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Page 15
GET YOU UP AND RUNNING Suggested set-up WARNING: THIS UNIT MUST BE EARTHED. STUDIOMASTER MODEL - FUSION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Page 16
GET YOU UP AND RUNNING Karaoke Suggested set-up WARNING: THIS UNIT MUST BE EARTHED. STUDIOMASTER MODEL - FUSION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Page 17
GET YOU UP AND RUNNING Club Mixer Suggested set-up WARNING: THIS UNIT MUST BE EARTHED. STUDIOMASTER MODEL - FUSION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Page 18
GET YOU UP AND RUNNING Nightclub / Entertainer Suggested set-up WARNING: THIS UNIT MUST BE EARTHED. STUDIOMASTER MODEL - FUSION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
GET YOU UP AND RUNNING Install Suggested set-up WARNING: THIS UNIT MUST BE EARTHED. STUDIOMASTER MODEL - FUSION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Sleeve Sleeve - Screen / Ground / Earth To connect Unbalanced equipment to an input or output Tip - Signal Sleeve Sleeve - Screen / Ground / Earth Tip - Signal Sleeve - Screen / Ground / Earth www.studiomaster.com www.studiomaster.com...
Output: single RCA/phono connector A.C. power Voltage range Fuse 230V 220V-240V T160mAL 115V 110V-120V T200mAL 50/60Hz, 22Watts max. Dimensions Width Height Depth (mm/inches) 482/19" 266/10.5" 114/4.5" When racked the unit occupies 6 rack spaces. Weight gross 6kg/13.2lb 8kg/17.6lb www.studiomaster.com www.studiomaster.com...
Page 23
NOTES NOTES In Accordance with our progressive product development, Studiomaster reserve the right to change features and specifications without prior notice. EXPECT THE BEST EXPECT THE BEST...
Page 24
EXPECT THE BEST EXPECT THE BEST STUDIOKING LIMITED Unit 1 Youngs Industrial Estate, Stanbridge Road, Leighton Buzzard, Bedfordshire LU7 4QB UK Tel : 44 (0)1525 217111 Fax : 44 (0)1525 378466 Email : enquiries@studiomaster.com www.studiomaster.com FUSION+M ENG V1...
Need help?
Do you have a question about the Fusion+ and is the answer not in the manual?
Questions and answers