Connect The Battery; Figure: 13 - Insert New Battery - Enfora Spider AT 3000 User Manual

5.1 Connect the Battery

1. Insert the Battery into the Bottom Housing Assembly with the cable up and to the right, See 5.1
"Connect the Battery"
2. Connect the new battery by attaching the connector to the battery terminals.
3. Close the Spider AT 3000 and replace the screws.
Take care to Tighten the Screws to 2.5 in-lb torque.
4. Remount the device in its original location.
See "Connect the Battery" on page 31
Figure: 13 - Insert New Battery
- 31 -