Selection Of Mounting Locations - Enfora Spider AT 3000 User Manual

4.1 Selection of Mounting Locations

Care should be taken in selecting the mounting location for the Spider AT 3000. Some considerations for
choosing the mounting location are:
Ideally the label should be mounted facing down (Towards the ground) such that the top of the unit
l
has a clear view of the sky. Mounting in this orientation provides optimum antenna performance.
If the above mounting is not possible the unit may be mounted on its side where the label is mounted
l
against the asset and the top of the unit faces towards the sky as much as possible.
The selected mounting surface must not allow water to pool around the device.
l
Care should be taken to avoid damaging wiring, electronics, plumbing, etc, when drilling holes to
l
mount the device.
The device should be mounted where it is protected from being impacted during operation.
l
- 22 -