Configure The Device - Enfora Spider AT 3000 User Manual

3.1 Configure the Device

Once the USB drivers are installed, and you can communicate with the Spider AT 3000, you can begin
configuring the unit to transmit data.
Before using the Enfora Provisioner to configure the device over-the-air, basic
communication parameters must be configured using a terminal program and USB
connection.
The only supported method of configuring the Spider AT 3000 with the basic parameters is to use the
Device Configuration Utility. The Spider AT 3000 requires Device Configuration Utility version 1.0.3 or
later.
- 17 -