1) Ground
(Onto this terminal connect the
ground wire incoming from the UPS input
mains power supply)
2) Input Mains phase U1
3) Input Mains phase V1
4) Input Mains phase W1
5) Input Mains Neutral N1
6) Input Reserve (Bypass) phase U3
7) Input Reserve (Bypass) Neutral N3
Note:. the maximum cable size that can be connected to the UPS power terminal blocks is 35 mm²
Page 8
Figure 3-1 Wiring on the UPS Hinet.
L1
L2
L3
N
8) Battery Positive
9) Battery Negative
10) Output UPS phase U2
11) Output UPS Neutral N2
12) Ground
NOTE
(12/01)
(ext. Battery input)
(ext. Battery input)
(ground lead towards users)
Hinet UPS User Manual