Power Controlling Target Devices - Avocent DSR2035 Installation & User Manual

56
DSR2035/8035 Switch Installer/User Guide
Table 4.2: Viewing Appliance Information (Continued)
To do this:
Display a list of devices attached to the
DSR2035/8035 switch
View the unit's part number, serial number and
EID number
Enter or display the unit's Site, Department
and Location
Enable the inactivity timeout
Change the unit encryption level
Change the modem time-out settings

Power Controlling Target Devices

NOTE: You must have Administrator privileges to change SPC power control device settings.
If a target device is connected to an SPC power control device outlet, you may power up, power
down or cycle (power target device down and then up) the target device using the DSR web server.
To power up a target device:
1. Select Appliance - Appliance Settings - Ports - SPC - Sockets from the DSR Explorer window.
The SPC sockets window will appear.
2. Select the checkbox to the left of the device that you wish to power.
3. Click the On button.
To power down a target device:
1. Select Appliance - Appliance Settings - Ports - SPC - Sockets from the DSR Explorer window.
The SPC sockets window will appear.
2. Select the checkbox to the left of the device that you wish to power down.
3. Click the Off button.
Select this:
Appliance - Connections
Appliance - Properties - Identity
Appliance - Properties - Location
Appliance - Appliance Settings - Sessions - KVM settings
Then, click the Enable Inactivity timeout box.
Appliance - Appliance Settings - Sessions - KVM settings
Then select the level of encryption desired for keyboard/
mouse signals and then video signals.
Appliance - Appliance Settings - Ports - Modem