Table of Contents
Advertisement
<= ...BACK... <=
19 Carry out a spark test as described in point "A":
– If the spark jumps = the coil functions cor-
rectly, so if the system malfunctions, it is due
to the earth microswitch or relative cable
[u
6.7.B];
– if the spark does not jump = the coil is faulty
and must be replaced
20 Remount the conveyor (10).
21 Remount the tank
22 Remove the starting system
C) Replacing the coil
31 Remove the starting system
32 Remove the tank
[u
33 Remove the conveyor (10).
34 Disconnect the faston of the earth cable (11).
35 Unscrew the screw (14) and stud bolt (15) and
remove the coil (12).
36 Fit the new coil and adjust the air gap as
described in steps 14 - 15 of the procedure
described in point "B".
37 Connect the faston of the earth cable (11).
38 Remount the conveyor (10).
39 Remount the tank
40 Remount the starting system
Tightening torques
1
Spark plug tightening torque ............ 16-18 Nm
14 Coil fixing screw ................................. 8-10 Nm
15 Coil fixing stud bolt ............................ 8-10 Nm
Technical information
Type of spark plug ...... RN9YC (Champion) or equivalent
Distance between electrodes .............. 0.6-0.8 mm
Coil/flywheel air gap ........................ 0.25-0.40 mm
Special equipment
3
Tester for spark test
© by GLOBAL GARDEN PRODUCTS
SERVICE MANUAL
6.6.
1
IGNITION SYSTEM
[u
6.6.C].
[u
6.1.A].
[u
6.2.A].
[u
6.2.A].
6.1.A].
[u
6.1.A].
[u
6.2.A].
11
15
11
SV200 R200
2007
••••
from
to
3 / 3
page
12
14
4/2007
Hide quick links:
Advertisement
Table of Contents
