Insignia INS8727 Installation Manual page 16

www.insigniarange.com Last Modified: 08/02/2018
Roof Lights
The roof lights come packed in with your accessories and need to be inserted on site. On
top of the roof there are 24 nuts, which simply need tightening by hand. Once this is done,
the lights simply push onto the fitting. Start on one side with the light closest to the middle as
shown below. Follow the lights around and finish back where you started so you can
compete the circuit.
Please Note: When connecting the roof LED lights to the electric box, only the male
1. Insert Lights
connection is needed, leaving the female connection hidden away under the roof cover.
2.Tighten Nuts
16