MIDI
Choosing a fixed Note Off Velocity value for the incoming notes
You can set a fixed Note Off Velocity value for the notes received from MIDI.
1
Go to the
Global > MIDI > MIDI IN Controls
2
Use the
Fixed Note Off Velocity
value for all the notes received via MIDI. This value is low enough to be fine
with the Sounds of Pa700.
This is useful when playing Pa700 with a controller sending a too high Note
Off velocity value. For example, the Electric Piano sounds in Pa700 include
RX Noises on the release phase, whose level is controlled by the Note Off
Velocity value. If the controller is sending too high value, these noises will
sound unnatural.
Video Out
Video Mode memorized in the Global
With the
Mode
you can choose to either only see Lyrics and Chords, or duplicate the inter-
nal display on an external display.
This parameter is no longer reset on startup, and is saved in the Global.
parameter (in the
page.
parameter to set a fixed Note Off velocity
Global > Audio & Video > Video Out
|5
[1.1]
[1.1]
page)