Hosts - Avocent Advanced Console Server ACS 6000 Command Reference Manual

--:- settings cli-> show

Hosts

The following procedure describes how to add a host to the hosts table.
To add a host to the host table:
1. Enter
cd appliance_settings/network/hosts
--:- units cli-> cd appliance_settings/network/hosts
2. Enter
show
--:- hosts cli-> show
127.0.0.1
ip:
hostname:
alias:
127.0.0.1/
3. Type
add
--:- hosts cli-> add<Return>
--:#- [hosts] cli-> ls
ip =
hostname =
alias =
--:#- [hosts] cli->
4. Enter
set hostname=
address for the host.
NOTE: Each parameter that follows the add command is separated by a space.
--:#- [hosts] cli-> set hostname=sharedacs6000 ip=172.26.31.164
5. Enter
commit
--:#- [hosts] cli-> save
6. Enter show
--:- hosts cli-> show
127.0.0.1
ip:
hostname:
alias:
172.26.31.164
ip:
hostname:
to view the current host settings.
127.0.0.1
localhost
then press .
Return
<hostname>
.
to verify the changes took place and to view the new host entry.
127.0.0.1
localhost
172.26.31.164
sharedacs6000
Chapter 3: CLI Appliance Settings Options
to navigate to the Hosts level.
<IP_address> to add the name of a host and the IP
ip=
33