Expanding The Functionality Of The Telephone; Multiple Handsets - Gigaset E630A GO Manual

Expanding the functionality of the telephone

Multiple handsets

Up to six handsets can be registered to the base station.
Each registered device is assigned an internal number (1-6) and an internal name (INT 1 – INT 6).
The number or name assigned can be changed.
If all internal numbers have already been assigned at the base station:
that is no longer needed
When a Gigaset handset is registered, the base station transfers entries for the
following online directories to the local directory on the handset to enable the online
directories to be used on the new handset as well.
•
The currently set online directory with a provider-specific name (e. g. kT Phone-
book).
•
The currently set classified directory with a provider-specific name (e. g. kT
Y.Pages).
•
The Gigaset.net directory with the name Gigaset.net.
Successful registration is acknowledged with the message Data Transfer x entries
received.
Registering the handset
A handset can be registered on up to four base stations.
Registration must be initiated on the base station and on the handset.
Both must be carried out within 60 secs.
On the base station
¤
Press and hold the Registration/Paging key on the base station (approx. 3 secs) . . . the
paging key flashes when the base station is in registration mode.
On the handset
¤
. . . use
Handset OK
registered to four base stations)
system PIN (default setting: 0000)
Once registration is complete, the handset returns to idle status. The internal number of the
handset appears in the display, e. g. INT 1. If not, repeat the procedure.
to select Settings
. . . use to select the base station (if the handset has already been
OK . . . an available base station is sought
OK
OK Registration
Multiple handsets
de-register a handset
OK Register
. . . Enter
73