Gigaset E630A GO Manual page 47

Activating/deactivating call screening
During recording of a message you can screen a call via the handset loudspeaker:
Permanently switching call screening on/off:
¤
. . . use
Change ( = on) . . . call screening is switched on/off for all registered handsets
Switching off call screening for the current recording:
¤
Press the display key Silence or the End call key
Operating when on the move (remote operation)
Access answer machine or switch answer machine on from another telephone (e.g. hotel, mobile
phone).
The system PIN is set to something other than 0000 and the other telephone has tone
dialling (DTMF).
Switching on the answer machine
¤
Call the telephone connection and let it ring until the announcement "Please enter PIN"
(approx. 50 seconds)
the answer machine is switched on, the remaining memory is announced, messages are
played back
Incorrect PIN is entered or entry takes too long (more than 10 seconds): The
connection is interrupted. The answer machine will remain deactivated.
The answer machine cannot be deactivated remotely.
Checking the answer machine
The answer machine is activated.
¤
Call the telephone connection
the announcement is interrupted
You are informed whether any new messages have been recorded. Message playback begins.
The answer machine is operated using the following keys:
During the time stamp playback: Skip to previous message.
During message playback: Go to the start of the current message.
Pause playback. Press again to resume.
After a pause of approx. 60 seconds, the connection is ended.
Go to the next message.
to select Answer Machine
. . . use to enter the telephone's system PIN within 10 seconds . . .
. . . during the announcement press key
Enter system PIN
Local answer machine
OK Call Screening
. . . Pick up call using
. . . playback of
45