Table of Contents
Advertisement
Installing an AutoView Switch
Installing your AutoView 424
The diagram below illustrates one possible configuration for your AutoView
424 switch. Follow the step-by-step procedure To install an AutoView 424
switch to properly install your new switch.
DB9 Serial Port
for Updating
Firmware
Server 1
Figure 2.2: AutoView 424 Installation Example
WARNING: To reduce the risk of electric shock or damage to your equipment -
- Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
- Plug the power cord into a grounded (earthed) outlet that is easily accessible at all times.
- Disconnect the power from the unit by unplugging the power cord from either the electrical
outlet or the unit.
Chapter 2: Installation
Extended Access User
(Via LongView)
Local User
AutoView 424
Servers 2-18
11
Advertisement
Table of Contents
