Bgp Attributes And Operators - Cisco NCS 5500 Series Configuration Manual

Implementing BGP
Information about Implementing BGP
A cease notification message is sent to the neighbor and the peering with the neighbor is terminated
when the number of prefixes received from the peer for a given address family exceeds the maximum
limit (either set by default or configured by the user) for that address family.
It is possible that the maximum number of prefixes for a neighbor for a given address family has been
configured after the peering with the neighbor has been established and a certain number of prefixes
have already been received from the neighbor for that address family. A cease notification message is
sent to the neighbor and peering with the neighbor is terminated immediately after the configuration if
the configured maximum number of prefixes is fewer than the number of prefixes that have already been
received from the neighbor for the address family.

BGP Attributes and Operators

This table summarizes the BGP attributes and operators per attach points.
BGP Configuration Guide for Cisco NCS 5500 Series Routers, IOS XR Release 6.2.x
119