Cisco NCS 5500 Series Configuration Manual page 167

BGP-based VPWS Autodiscovery
Verification:
PE1:
PE1# show l2vpn discovery xconnect
Service Type: VPWS, Connected
List of VPNs (1 VPNs):
XC Group: gr1, MP2MP mp1
List of Local Edges (1 Edges):
Local Edge ID: 1, Label Blocks (1 Blocks)
List of Remote Edges (1 Edges):
Remote Edge ID: 2, NLRIs (1 NLRIs)
16045
PE1# show l2vpn xconnect mp2mp detail
Group gr1, MP2MP mp1, state: up
VPN ID: 100
VPN MTU: 1500
L2 Encapsulation: VLAN
Auto Discovery: BGP, state is Advertised (Service Connected)
Route Distinguisher: (auto) 3.3.3.3:32770
Import Route Targets:
Export Route Targets:
Signaling protocol:BGP
CE Range:10
....
Group gr1, XC mp1.1:2, state is up; Interworking none
Local CE ID: 1, Remote CE ID: 2, Discovery State: Advertised
AC: GigabitEthernet0/1/0/1.1, state is up
Type VLAN; Num Ranges: 1
Label base Offset Size
---------- ------ ----
16030 1 10
Status Vector: 9f ff
Label base Offset Size
---------- ------ ----
1 10
Status Vector: 7f ff
2.2.2.2:100
2.2.2.2:100
BGP Configuration Guide for Cisco NCS 5500 Series Routers, IOS XR Release 6.2.x
VPWS with BGP Autodiscovery and BGP Signaling
Time Created
-------------------
01/24/2009 21:23:04
Peer ID Time Created
--------------- -------------------
1.1.1.1 01/24/2009 21:29:35
157