Liquid Crystal Display - Toyota Land Cruiser Prado Owner's Manual

■

Liquid crystal display

Small spots or light spots may appear on the display. This phenomenon is
characteristic of liquid crystal displays, and there is no problem continuing to
use the display.
■
Outside temperature display
In the following situations, the correct outside temperature may not be dis-
played, or the display may take longer than normal to change.
●
When stopped, or driving at low speeds (less than 20 km/h [12 mph])
●
When the outside temperature has changed suddenly (at the entrance/
exit of a garage, tunnel, etc.)
■
When "--" or "E" is displayed on the outside temperature display
The system may be malfunctioning. Take your vehicle to your Toyota dealer.
■
When disconnecting and reconnecting battery terminals
The following information data and settings will be reset:
●
Average fuel consumption after refueling
●
Average fuel consumption
●
Average vehicle speed
●
Elapsed time
■
Customization
Setting of available languages can be changed.
(Customizable features →P. 632)
NOTICE
■
The multi-information display at low temperatures
Allow the interior of the vehicle to warm up before using the liquid crystal
information display. At extremely low temperatures, the information display
monitor may respond slowly, and display changes may be delayed.
2-2. Instrument cluster
225
2