Toyota Land Cruiser Prado Owner's Manual page 584

Assembling the jack handle.
STEP 4
Remove the jack handle, jack handle extension bar and jack
handle bar from the tool box and assemble by following these
steps.
5-2. Steps to take in an emergency
Loosen the bolt and the screw
using either the jack handle
end or a screwdriver.
Assemble the jack handle
extension bar and the jack
handle bar and tighten the
bolts.
Check that the bolts are firmly
tightened.
Assemble the jack handle
extension bar and the jack
handle and tighten the screw.
Check that the screw is firmly
tightened.
5
583