Channel:ID
-----
Channel:ID
-----
Channel:ID
1 :
2 :
[↑] Up [↓] Down [ESC] Exit [Ctrl-Y] Save
4.
Use the arrow keys to choose which drive contains the existing data to be
copied.
5.
Press Ctrl-Y to Save selection and start duplication. The following progress
screen will appear.
6.
Select Y to continue. If you choose N, you will be returned to step 1.
7.
Once complete, the following screen will appear confirming that your
Security array has been created. Press any key to reboot the system.
8.
Once the arrayed drives have been formatted, proceed to Chapter 4 of this
Manual to install your operating system and/or FastTrak driver.
Source Disk
Drive Model
-----
Target Disk
Drive Model
-----
[Please Select A Source Disk]
Drive Model
SEAGATE S380023AS
SEAGATE S380023AS
Start to duplicate the image . . .
Do you want to continue? (Yes/No)
Y – Continue N - Abort
Array has been created.
<Press Any Key to Reboot>
13
Chapter 2: Installation
Capacity (MB)
-----
Capacity (MB)
-----
Capacity (MB)
80024
80024