Table of Contents
Advertisement
FastTrak S150 TX4 User Manual
New Windows 2000 Installation
The following details the installation of the FastTrak TX4 drivers while installing
Windows 2000.
1.
Start the installation:
•
Floppy Install: Boot the computer with the Windows 2000 installation
diskettes.
•
CD-ROM Install: Boot from the CD-ROM. Press F6 after the message
"Press F6 if you need to install third party SCSI or RAID driver"
appears.
2.
When the Windows 2000 Setup window is generated, press S to specify an
Additional Device(s).
3.
Insert the FastTrak TX4 driver diskette into drive A: and press Enter.
4.
Choose Win2000 Promise FastTrak TX4000/S150 TX Series Controller
from the list that appears on screen then press Enter.
5.
The Windows 2000 Setup screen will appear again saying "Setup will load
support for the following mass storage devices:" The list will include
"Win2000 Promise FastTrak TX4000/S150 TX Series Controller".
NOTE: If there are any additional devices to be installed, specify them now.
When all devices are specified, continue to the next step.
6.
From the Windows 2000 Setup screen, press Enter. Setup will now load all
device files and then continue the Windows 2000 installation.
36
Hide quick links:
Advertisement
Table of Contents
