Table of Contents
Advertisement
FastTrak S150 TX4 User Manual
New Windows ME Installation
The following details the installation of the FastTrak TX4 drivers while installing
Windows ME.
1.
Install the FastTrak TX4 controller card into your system.
2.
Install Windows ME fully.
3.
After installation, go to the Start menu and choose Settings.
4.
From the Settings menu, choose Control Panel.
5.
In the Control Panel window, double-click the System icon.
6.
In the System window, choose the Device Manager tab.
7.
In the hierarchical display under Other Devices is a listing for PCI RAID
Controller. Click it then click the Properties button.
8.
In the Properties window, choose the Driver tab then choose Update Driver
and click Next.
9.
Choose Search for a better driver than the one your device is using now
(recommended) then click Next.
10. Choose Specify Location then type A:\WIN98-ME in the text box.
11. Insert the FastTrak TX4 driver diskette into the A: drive.
12. Click the Next button. A message informing you that "Win98-ME Promise
FastTrak TX4000/S150 TX Series Controller" should appear.
13. Click Next, then click Finish.
14. When asked if you want to restart your computer, click Yes. Immediately
remove the diskette from drive A:.
38
Hide quick links:
Advertisement
Table of Contents
