English - Philips HR1840 Manual

ENGLISH

6
Introduction
The appliance has been equipped with a built-in safety lock that
prevents it from functioning if the accessories have been assembled
incorrectly or have not been assembled at all.
Never use the accessories to turn the appliance on and off!
Important
Please read these instructions carefully and look at the
illustrations before using the appliance.
Keep these instructions for further reference.
This appliance is intended for household use only.
Check if the voltage indicated on the appliance corresponds to
the local mains voltage (110 - 127V or 220 - 240V) before you
connect the appliance to the wall socket.
If the mains cord is damaged, it must be replaced by Philips, a
service centre authorised by Philips or similarly qualified persons
in order to avoid a hazard.
Do not use the appliance when the mains cord, the plug or other
components are damaged.
Assemble the appliance properly before plugging it into the wall
socket.
When the jar unit or other accessories are properly fixed on the
motor unit, you can hear the 'click' sound.
Do not remove accessories from the motorunit when the
appliance is working.
Do not exceed the quantities and preparation times indicated in
the diverse sections.
Let hot ingredients cool down before chopping them or pouring
them into the blender jar (max. temperature 80cC/175cF).
Keep the appliance out of the reach of children.
Never let the appliance operate unattended.
Avoid touching the SHARP blades, especially when the appliance
is plugged in.
If the blades get stuck, UNPLUG THE APPLIANCE before
removing the ingredients that are blocking the blades by using a
spatula.
Never reach into the jar or bowl with your fingers or an object
while the appliance is running.
Never immerse the motor unit in water or any other fluid, nor
rinse it under the tap. Use only a moist cloth.
Unplug the appliance immediately after use, e.g. before unscrewing
the jar.
Noise level: Lc= 83 dB [A]