2.5
Assembly module
Before you can install a 5.25-inch drive, card reader, and 3.5" HDD, you should first remove
the front panel cover and assembly module.
Ensure to unplug the power cable before installing or removing any system components.
Failure to do so may cause damage to the motherboard and other system components!
2.5.1
Removing the assembly module
To remove the assembly module:
1.
Locate the front panel cover latches and lift both latches gently to remove the front
panel cover.
2.
Pull the assembly module lock towards the front (A) to release the assembly module
from the chassis, then lift the assembly module to remove it (B).
2-8
Chapter 2: Hardware Setup