Table of Contents
Advertisement
13.
M.2 socket 3
This socket allows you to install an M.2 (NGFF) SSD module.
•
This socket supports M Key and type 22110/2280/2260/2242 storage devices.
•
This socket supports PCIe and SATA modes.
•
The M.2 (NGFF) device is purchased separately.
•
When the M.2 connector is operating in SATA mode, SATA connector 8 (SATA6G_8)
will be disabled.
14.
Chassis intrusion connector (2-pin INTRUSION)
These leads are for the intrusion detection feature for chassis with intrusion sensor
or microswitch. When you remove any chassis component, the sensor triggers and
sends a high level signal to these leads to record a chassis intrusion event. The default
setting is short CHASSIS# and GND pin by jumper cap to disable the function.
ASUS ESC500 G4
3-21
Advertisement
Table of Contents
