Table of Contents
Advertisement
2.11
BIOS update utility
USB BIOS Flashback
USB BIOS Flashback allows you to easily update the BIOS without entering the existing
BIOS or operating system. Simply insert a USB storage device to the USB port (the USB port
hole marked in green on the I/O shield) then press the USB BIOS Flashback button for three
seconds to automatically update the BIOS.
To use USB BIOS Flashback:
1.
Download the latest BIOS from the support site at www.asus.com/support/ and save it
to as USB storage device.
•
•
2.
Insert the USB storage device to the USB Flashback port.
3.
Shut down your computer.
4.
Press the BIOS Flashback button for three seconds until the Flashback LED blinks
three times, indicating that the BIOS Flashback function is working.
5.
Wait until the light goes out, indicating that the BIOS updating process is completed.
For more BIOS update utilities in BIOS setup, refer to the section 4.1 Managing and
updating your BIOS in Chapter 4.
•
•
•
2-18
We recommend you to use a USB 2.0 storage device to save the latest BIOS version
for better compatibility and stability.
When downloading or updating the BIOS file, rename it as P10SMWSI.CAP for this
motherboard.
USB BIOS Flashback port BIOS Flashback button
Do not unplug portable disk, power system, or press the CLR_CMOS button while
BIOS update is ongoing, otherwise update will be interrupted. In case of interruption,
please follow the steps again.
If the light flashes for five seconds and turns into a solid light, this means that
the BIOS Flashback is not operating properly. This may be caused by improper
installation of the USB storage device and filename/file format error. If this scenario
happens, please restart the system to turn off the light.
Updating BIOS may have risks. If the BIOS program is damaged during the process
and results to the system's failure to boot up, please contact your local ASUS Service
Center.
Chapter 2: Hardware Setup
Advertisement
Table of Contents
