Table of Contents
Advertisement
4.4.4
Platform Configuration
USB Configuration
Legacy USB Support [Enabled]
[Disabled]
The USB devices can be used only for the BIOS setup program. It cannot
be recognized in boot devices list.
[Enabled]
Enables the support for USB devices on legacy operating systems (OS).
[Auto]
Allows the system to detect the presence of USB devices at startup. If
detected, the USB controller legacy mode is enabled. If no USB device is
detected, the legacy USB support is disabled.
XHCI Hand-off [Disabled]
This item is set to [Disabled] by default for the EHCI (enhanced host controller interface)
support by XHCI drivers in operating systems.
[Enabled]
Support XHCI by BIOS for operating systems without XHCI support.
[Disabled]
Support XHCI by XHCI drivers for operating systems with XHCI support.
ASUS ESC500 G4 SFF
4-21
Advertisement
Table of Contents
