Connecting The Ground Wire - Extreme Networks Summit X150-24t Hardware Installation Manual

Confidential and proprietary information of Extreme Networks. © 2011 Extreme Networks, Inc.
Replacing DC Power Supplies in Summit Family Switches
Figure 246: Installing a Summit 450 W or 550 W DC Power Supply
3 Reconnect the ground wire as described in the next section.

Connecting the Ground Wire

WARNING!
Be sure to connect the chassis ground wire before you connect any power cables.
To connect the ground wire to the Summit 450 W or 550 W DC power supply:
1 Verify that the DC circuit is de-energized.
2 Pull the cover off the terminal block
3 Identify the grounding point at the left of the terminal block
Figure 247: Connecting the Ground Wire
300
All rights reserved. DRAFT. October 20, 2011
(Figure 253).
SH_158
(Figure 253).
S
Summit Family Switches Hardware Installation Guide