Replacing A Summit 300 W Ac Power Supply - Extreme Networks Summit X150-24t Hardware Installation Manual

Confidential and proprietary information of Extreme Networks. © 2011 Extreme Networks, Inc.
9
C H A P T E R
This chapter describes how to replace AC power supplies in a Summit X460, X480, X650, or X670 series
switch and how to remove EPS series AC redundant power supplies.
This chapter includes the following sections:
Replacing a Summit 300 W AC Power Supply on page 281
G
Replacing a Summit 450 W or 550 W AC Power Supply on page 284
G
Replacing a Summit 750 W AC Power Supply on page 286
G
Replacing a Summit X850 W AC Power Supply on page 289
G
Removing EPS Series AC Redundant Power Supplies on page 291
G
NOTE
Read the information in this chapter thoroughly before attempting to replace one of the listed
Summit X650 components.

Replacing a Summit 300 W AC Power Supply

The Summit 300 W AC power supplies are compatible with the Summit X460 series non-PoE switches.
These switches have two bays for hot-swappable power supplies. In a switch with a redundant power
configuration, you can replace one Summit AC power supply without powering down the switch.
You need the following tools and materials to replace a Summit 300 W AC power supply:
Thermal protective gloves
G
AC power cord, if you will not be re-using the cord from the removed power supply
G
An AC power cord is not included with a Summit AC power supply. You must obtain a power
supply cord that meets the requirements listed under
To replace a Summit 300 W AC power supply:
1 Disconnect the AC power cord from the wall outlet and from the power supply.
2 Note the orientation of the installed power supply.
Summit Family Switches Hardware Installation Guide
All rights reserved. DRAFT. October 20, 2011
Replacing AC Power Supplies in
Summit Family Switches
"Selecting Power Supply Cords" on page 339.
281