Confidential and proprietary information of Extreme Networks. © 2011 Extreme Networks, Inc.
Evaluating and Meeting Cable Requirements
This section addresses requirements for the cable you should use when installing your network
equipment. It includes:
Cabling Standards
G
Cable Labeling and Record Keeping
G
Installing Cable
G
RJ-45 Connector Jackets
G
Radio Frequency Interference
G
Cabling Standards
Extreme Networks recommends using the Building Industry Consulting Service International (BICSI)
Registered Communications Distribution Designer (RCDD), which is globally recognized as a standard
in site planning and cabling. For information, go to:
http://www.bicsi.org
Cable Labeling and Record Keeping
A reliable cable labeling system is essential when planning and installing a network. Maintaining
accurate records helps you to:
Relocate devices easily.
G
Make changes quickly.
G
Isolate faults in the distribution system.
G
Locate the opposite end of any cable.
G
Know the types of network devices that your cabling infrastructure can support.
G
Follow these guidelines when setting up a cable labeling system suitable for your installation:
Identify cables by securely attaching labels to all cable ends.
G
Assign a unique block of sequential numbers to the group of cables that run between each pair of
G
wiring closets.
Assign a unique identification number to each equipment rack.
G
Identify all wiring closets by labeling the front panel of your Extreme Networks equipment and
G
other hardware.
Keep accurate and current cable identification records.
G
Post records near each equipment rack. For each cable drop, include information about the cable
G
source, destination, and jumper location.
Summit Family Switches Hardware Installation Guide
All rights reserved. DRAFT. October 20, 2011
143