Standard Avionics - Cirrus SR22 Pilot Operating Handbook

Cirrus Design
SR22

Standard Avionics

The following paragraphs and equipment descriptions describe all
standard avionic installations offered for the SR22. The avionics
navigation and communication equipment are mounted in the center
console and are easily accessible from either pilot seat.
For detailed descriptions of specific avionic equipment, operating
procedures, or data for optional avionic equipment, refer to the
equipment manufacturer's pilot's guide and the FAA Approved
Airplane Flight Manual Supplement in Section 9 for specific
information regarding the SR22 installation.
Standard avionics suites are available in the following configurations:
Avionics Configuration A - Serials 0002 through 1601, 1603
through 1643 and 1645 through 1662 without PFD:
• Moving Map Display (Avidyne MFD)
• Two-Axis Autopilot (S-Tec System 30)
• Integrated Audio System with Intercom (Garmin GMA 340)
• Marker Beacon Receiver (Garmin GMA 340)
• Two IFR Approach-Certified GPS (Garmin GNS 430 and
Garmin GNS 420)
• Two VHF Communications Transceivers (Garmin GNS 430 and
Garmin GNS 420)
• Single Navigation (VOR/LOC/GS) Receiver (GNS 430)
• Mode C Transponder with Altitude Encoder (Garmin GTX 327)
• Horizontal Situation Indicator
• Course Deviation Indicator
Avionics Configuration B - Serials 0002 through 1601, 1603
through 1643 and 1645 through 1662 without PFD:
• Moving Map Display (Avidyne MFD)
• Two-Axis Autopilot (S-Tec System 55X)
• Integrated Audio System with Intercom (Garmin GMA 340)
• Marker Beacon Receiver (Garmin GMA 340)
• Two IFR Approach-Certified GPS (Garmin GNS 430)
P/N 13772-001
Revision A10
Section 7
Airplane Description
7-93