Playing Back Pictures On A Tv Screen - Panasonic Lumix DC-GH5S Operating Instructions For Advanced Features

11. Connecting to other equipment

Playing Back Pictures on a TV Screen

Preparations: Turn this unit and the TV off.
1
Connect the camera and the TV with an HDMI cable.
• Check the direction of the terminals and plug in/out straight holding onto the plug.
(It may result in malfunction by the deforming of the terminal if it is plugged in obliquely
or in wrong direction.)
Do not connect devices to incorrect terminals. Doing so may cause malfunction.
A [HDMI] socket (Type A)
B HDMI cable
• Use a "High Speed HDMI cable" with the HDMI logo.
Cables that do not comply with the HDMI standards will not work.
"High Speed HDMI cable" (Type A–Type A plug, up to 1.5 m (4.9 feet) long)
• Check the [HDMI Mode (Play)].
• When [System Frequency] is set to [59.94Hz (NTSC)], set [HDMI Mode (Play)] to [AUTO] to
play back motion pictures recorded at a frame rate of 24p.
For settings other than [AUTO], it cannot output at 24 frames/second.
• No picture is displayed on the screen of this unit.
2
Turn on the TV and select the input to match the connector in use.
3
Turn the camera on and then press [(].
• When [System Frequency] is set to a broadcasting system different from that of your region,
images may not be played back correctly.
• Depending on the [Aspect Ratio], black bands may be displayed on the top and bottom or the
left and right of the pictures.
• Change the screen mode on your TV if the picture is displayed with the top or bottom cut off.
• HDMI output will be cancelled if a USB connection cable (supplied) is connected
simultaneously.
• No sound is output from the camera speakers.
• Read the operating instructions for the TV.
C HDMI socket (on the TV)
(P258)
329
HDMI