Playing Back Pictures On A Tv Screen - Panasonic LUMIX DC-G95D Owner's Manual For Advanced Features

11. Connecting to other devices

Playing Back Pictures on a TV Screen

Preparations: Turn off the camera and TV.
1
Connect the camera and the TV with an HDMI micro cable.
• Check the direction of the terminals and plug in/out straight holding onto the plug.
(It may result in malfunction by the deforming of the terminal if it is plugged in obliquely
or in wrong direction.)
Do not connect devices to incorrect terminals. Doing so may cause malfunction.
A [HDMI] socket
B HDMI micro cable
• Use a "High Speed HDMI micro cable" with the HDMI logo.
Cables that do not comply with the HDMI standards will not work.
"High Speed HDMI micro cable" (Type D–Type A plug, up to 2 m (6.6 feet) long)
2
Turn on the TV and select the input to match the connector in use.
3
Turn the camera on and then press [(].
• Depending on the [Aspect Ratio], black bands may be displayed on the top and bottom or the
left and right of the pictures.
• Change the screen mode on your TV if the picture is displayed with the top or bottom cut off.
• Check the [HDMI Mode (Play)].
• To play back 24p motion pictures, set [HDMI Mode (Play)] to [AUTO]. Otherwise, the picture is
not output at 24 frames per second.
• No image will be displayed on the monitor/viewfinder of the camera. In addition, no audio will
be output from the speaker of the camera.
• HDMI output will be canceled if a USB connection cable (supplied) is connected
simultaneously.
• Read the operating instructions for the TV.
C HDMI socket (on the TV)
(P234)
294
HDMI