Panasonic Lumix DC-GH5S Operating Instructions For Advanced Features page 341

Hide thumbs Also See for Lumix DC-GH5S:
Table of Contents

Advertisement

11. Connecting to other equipment
• Disconnect the USB connection cable after printing.
• Use a battery with sufficient battery power or the AC adaptor (optional). If the remaining
battery power becomes low while the camera and the printer are connected, the status
indicator blinks and the alarm beeps. If this happens during printing, stop printing at once. If
not printing, disconnect the USB connection cable.
• Do not disconnect the USB connection cable while [å] (Cable disconnect prohibit icon) is
displayed.
(May not be displayed depending on the type of printer used.)
• Before inserting or removing a card, turn the camera off, and disconnect the USB connection
cable.
Not available in these cases:
• Motion pictures, 4K burst files, and images recorded with the Post Focus function cannot be
printed.
Selecting a single picture and printing it
1
Press 2/1 to select the picture and then press
[MENU/SET].
2
Press 3 to select [Print start] and then press [MENU/
SET].
Selecting multiple pictures and printing them
1
Press 3.
2
Press 3/4 to select an item and then press [MENU/SET].
[Multi Select]
[Select All]
[Rating]
3
Press 3 to select [Print start] and then press [MENU/SET].
Multiple pictures are printed at one time.
• Press 3/4/2/1 to select the pictures and then press [MENU/
SET].
(Press [MENU/SET] again to cancel the setting.)
• After the pictures have been selected, press [DISP.].
Prints all the stored pictures.
Prints all images with [Rating] levels between [¿1] and [¿5].
341
PictBridge
PictBridge

Advertisement

Table of Contents
loading

Table of Contents