Recording Images With Superimposed Recording Dates ([Time Stamp Rec]) - Panasonic Lumix DC-GH5S Operating Instructions For Advanced Features

7. Recording Motion Pictures
• Even if you disconnect the BNC cable, the camera will remain in slave state.
• Perform one of the following operations to release the camera from the slave state.
– Operating the camera on/off switch
– Switching the Recording Mode
– Changing the [System Frequency]
– Setting the [Variable Frame Rate]
– Changing the frame rate of [Rec Quality] from 59.94p/59.94i/29.97p to 23.98p
– Changing the frame rate of [Rec Quality] from 23.98p to 59.94p/59.94i/29.97p
– Changing the setting of [Count Up], [Time Code Value] or [Time Code Mode] in [Time Code]
Recording images with superimposed recording dates ([Time Stamp
Rec])
Applicable modes:
• You cannot delete recording dates after superimposing
them.
> [Motion Picture] > [Time Stamp Rec]
MENU
Settings: [ON]/[OFF]
• Recording dates are not recorded to 4K burst files and RAW images.
Not available in these cases:
• This function is not available in the following cases:
– When recording with the Post Focus function
– When [Variable Frame Rate] is set
– When [Anamorphic(4:3)] is set
– When [Color Bars] is set
173
2018. 12. 1 10:00:00:00