Table of Contents
Advertisement
11. Connecting to other equipment
Playing Back Pictures on a TV Screen
You can view pictures on a TV screen by connecting your camera to your TV with the
HDMI micro cable.
Preparations: Turn this unit and the TV off.
1
Connect the camera and a TV.
• Check the direction of the terminals and plug in/out straight holding onto the plug.
(It may result in malfunction by the deforming of the terminal if it is plugged in obliquely
or in wrong direction.)
Do not connect devices to incorrect terminals. Doing so may cause malfunction.
A HDMI socket (on the TV)
B HDMI micro cable
• Use a "High Speed HDMI micro cable" with the HDMI logo.
Cables that do not comply with the HDMI standards will not work.
"High Speed HDMI micro cable" (Type D–Type A plug, up to 2 m (6.6 feet) long)
• Check the [HDMI Mode (Play)].
• To play back motion pictures recorded with [System Frequency] set to [59.94 Hz (NTSC)]
and the recording frame rate set to 24p in [Rec Quality], set [HDMI Mode (Play)] to [AUTO].
For settings other than [AUTO], it cannot output at 24 frames/second.
• No picture is displayed on the screen of this unit.
2
Turn on the TV and select the input to match the connector in use.
3
Turn the camera on and then press [(].
C [HDMI] socket (on the camera)
(P233)
300
HDMI
Advertisement
Table of Contents
