46 | Modes
Note: Your service provider can turn on/off all the visual and audio indications, when you enter Local Site
Trunking Mode.
Exiting Local Site Trunking
When the link with the central network controller is reestablished, your radio exits Local Site Trunking, and the
following occurs:
•
Your radio plays an Exiting Local Site Trunking tone.
•
Any call in progress during Local Site Trunking is dropped.
•
Display icons and soft keys turn blue.
Note: Your service provider can turn on/off all the visual and audio indications, when you exit Local Site
Trunking Mode.
Direct Mode Operation
Direct Mode Operation is a mode of simplex operation where radios communicate directly.
Figure 2: Direct Mode Operation
Entering DMO Mode
To enter the DMO Mode:
•
From the home screen, press the
•
From the home screen, select Optns → Direct Mode.
Selecting Talkgroups
From the home screen, use one of the following methods:
•
Press left or right N
•
Select Optns → TG by abc. Enter a talkgroup name and select the talkgroup name from the list.
•
Select Optns → TG by Folder. Select a folder and then a talkgroup name.
•
Press R
K
OTARY
NOB
Send Feedback
| |
key. Select More . . . → Networks → Direct Mode.
MENU
key. Press Select to confirm.
AVIGATION
and rotate it until the required talkgroup name is displayed. Press Select to confirm.