Fronius IG Plus 30 V-1 Operating Instructions Manual page 87

The fourth digit flashes.
Use the "Up" and "Down" keys to se-
11
lect a value for the fourth digit of the ac-
cess code
Press the "Enter" key
12
The fifth digit flashes.
Use the "Up" and "Down" keys to se-
13
lect a value for the fifth digit of the ac-
cess code
Press the "Enter" key
14
The access code flashes.
*) ... Code example
*)
Press the "Enter" key
15
The inverter is now in the Basic Service me-
nu, the first parameter is displayed:
- 'MIXMODE' for multiphase inverters
- 'DCMODE' for one-phase inverters
Use the "Up" or "Down" keys to select
16
the 'GNDMODE' parameter
Press the "Enter" key
17
The grounding mode is displayed.
Use the "Up" and "Down" keys to se-
18
lect the grounding mode:
OFF = no solar module ground (factory set-
ting)
85