Remote Control Connection - Silvercrest SWK 360 A1 User Manual

Remote Control Connection


The remote control can be connected to the camera automatically when camera is in
start-up status.
Note: If the camera is in Wi-Fi mode, the remote control can not be connected. Please
close the Wi-Fi function before using the remote control.
Capture/Recording Button:
1. Taking a picture: Press the button once to take a photo.The status indicator light will
flash once.
2. Recording a video clip: Press and hold on the button for 3 seconds,the camera will
start to record a video clip. The status indicator light will flash continuously and
slowly.Press this button again to stop recording. The status indicator light will stop
flashing.
Capture/Recording Button
Turn On/Off The Screen Button
28