Silvercrest SWK 360 A1 User Manual page 18

Firmware Look up the Firmware information including the model, version and
Version manufacturer.
Function Setup
1. Turn on the camera.
2. Press Mode button to switch to the setting screen.
3. Press OK button to enter the function setting screen.
4. Then press Mode button to switch to the function setting menu screen as below.
5. Press Up/Down button to scan all menu options.
6. Press OK button to chose the target menu.
7. Press Up/Down button to scan all submenu and press OK button to confirm the option.
8. Press Mode button to switch to icon
press the OK button to exit.
,the screen will show " Press OK To Exit ".Then
17