Fluke 28 II Ex Getting Started Manual page 8

28 II Ex
Getting Started Manual
XW Warning
To prevent personal injury in mining
hazardous areas:
• Avoid extreme mechanical burdens. The
Product can withstand impacts with an
energy of seven joules at -20 °C.
•
Do not allow the Product to come in
permanent contact with oil, hydraulic
fluid, or grease.
•
Do not install the Product in a fixed
installation.
XW Warning
To prevent possible electrical shock, fire, or
personal injury in ALL areas of operation:
• Read all safety Information before you
use the Product.
•
Comply with local and national safety
codes. Use personal protective
equipment (approved rubber gloves, face
protection, and flame-resistant clothes)
to prevent shock and arc blast injury
where hazardous live conductors are
exposed
4
•
See the Ex Safety Information section for
additional warnings on Product use in
hazardous areas.
•
Use the Product only as specified, or the
protection supplied by the Product can
be compromised.
•
Do not use the Product in damp or wet
environments.
• Do not exceed the Measurement
Category (CAT) rating of the lowest rated
individual component of a Product,
probe, or accessory.